New Hours | Tue-fri 10AM-5pm | sat 9am-2pm | Closed SUN,MON

0

Your Cart is Empty

Vantage Synergy Draft Line Cleaning System

Size

What is the #1 cause of off flavors in most draft systems? DIRTY LINES. 

Lines need to be cleaned every 2-3 weeks and between keg changes. Failing to keep up with your line cleaning risks allowing bacteria and other microorganisms to establish themselves. This will negatively affect the flavor of everything served through the dirty lines. 

Cleaning lines is a chore, and not many people enjoy it, so we are so glad that this system came out to help reduce the time commitment needed to maintain your draft lines. 

The Vantage Synergy system is the fast, easy, and effective way to keep your beverage lines at their absolute best. 

Vantage Synergy is an industry-leading non-caustic, non-toxic beverage system cleaning solution that reduces cleaning time by up to 50%

  • Up to 50% faster than traditional alkaline or acid line cleaners
  • Removes biofilm, biomass, odors, and beerstone in a single pass
  • Biodegradable ingredients lessen the impact on wastewater and the environment
  • The non-hazardous formula is much safer to handle than traditional cleaners
  • Combining the three components of Vantage Synergy simplifies and speeds up cleaning, making you more likely to keep up with scheduled cleanings 
  • Works with hard or soft water

The Vantage Synergy Power User Formula combines the Biomass Remover, Demineralizer, and Accelerator to create the most powerful, yet safe, beverage system cleaning solution on the market. 

PLEASE NOTE: ONLY mix Vantage Synergy products with each other & NEVER mix any other chemical products with Vantage Synergy products.

Directions: For each gallon of water add 2 oz each of Biomass Remover, Demineralizer, and Accelerator

If using a recirculation pump or CO2 pot:

  1. Mix solution as listed
  2. Drain beverage from lines
  3. Load lines with solution & recirculate for 10 minutes
  4. Flush with clean water and rinse lines
  5. Reconnect beverage lines, draw beverage until it dispenses
  6. Test for quality and taste

If using a hand pump or gravity:

  1. Mix solution as listed
  2. Drain beverage from lines
  3. Load lines with solution & soak for 30 minutes
  4. Flush with clean water & rinse lines
  5. Reconnect beverage lines, draw beverage until it dispenses
  6. Test for quality and taste

That’s it! It couldn’t be easier! 

Each set makes 16 gallons of Vantage Synergy Power User Formula, making it a great value, especially with home draft systems! 

About the products:

Biomass Remover

Biomass Remover offers all the power of caustic without the associated danger. This revolutionary non-caustic beverage system cleaner replaces traditional hazardous alkaline products such as Penetrate. Safety matters and Vantage Synergy Biomass Remover provides all the results of conventional, hazardous, alkaline caustic without any of the danger. Triple zero rated for health and safety. No DOT hazardous shipping warnings. Features industry-standard tracer dye.

Demineralizer

Vantage Synergy Demineralizer can be used in place of corrosive acid-based beverage system cleaners such as ALC as a safe, effective alternative. Acid cleaning beverage systems on a quarterly basis are the best way to reduce beer stone deposits, but traditional acid cleanings are time-consuming, dangerous, and often underperformed. Put the acid cleaners away and save time and improve beverage quality by demineralizing a beverage system with every cleaning cycle with Vantage Synergy Demineralizer. Triple zero rated for health and safety. No DOT hazardous shipping warnings. Features industry-standard tracer dye.

Accelerator

Accelerator supercharges the Vantage Synergy Power User Formula to provide superior results with unmatched safety. This enzyme-based cleaner will reduce biofilms and odors throughout your beverage system. Enzyme-based cleaners for beverage systems are a safe and modern alternative to traditional hazardous chemicals. Vantage Synergy Accelerator is not a standalone cleaning option but is designed for the three-part Power User Formula.